Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual do Utilizador descarregar pdf (Página 53)

Cut to Length with Multi Stroke Program

JOB NUMB=00 ENTER IN

THE SEQ=00 THEN

PRESS F4 TO CONTINUE

Pressing the F4 key will display the following screen.

JOB#=00 SEQUENCE#=00

FL=000.000 REPEAT=00

SPEED=000 ACCEL=000

F4=EXIT TO MAIN MENU

The above screen displays the job number and the sequence that was

selected. If all that was needed was to look at the sequence to verify that it

was correct then pressing the F4 key will return you to the main menu. If

there was a problem with this particular

sequence, like a length change, then the length could be adjusted now and

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (52 of 66) [12/10/2001 3:44:58 PM]

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Sem comentários

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual do Utilizador Página 53