Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual do Utilizador descarregar pdf (Página 22)

Cut to Length with Multi Stroke Program

DRIVE ROLL PARALLELISM ADJUSTMENT

Every servo feed has an eccentric adjustment screw to adjust the upper roller

to be in parallel to the lower roller. The maximum adjustment is .008” on the

eccentric.

The adjustment screw is located behind the belt cover and is held fast by a 10-

32 socket head cap screw. The actual adjustment screw is a slotted eccentric

pin which is turned clockwise or counter-clockwise to raise or lower one end of

the upper roll.

The parallel adjustment is factory set when the unit is manufactured but if

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (21 of 66) [12/10/2001 3:44:57 PM]

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Sem comentários

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual do Utilizador Página 22