Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual do Utilizador descarregar pdf (Página 36)

Cut to Length with Multi Stroke Program

Periodically grease with lubriplate or equivalent grease to anti-backup (if

purchased) & pinch roll actuating piston nose where it contacts the pressure

plate.

PRECAUTIONS & SAFETY

NEVER - Put screwdrivers or foreign materials in feed rolls

NEVER - Hold onto material as it is being fed through the servo

NEVER - Wear neckties around the servo feed rolls

NEVER - Force the rolls open by prying on them

NEVER - Modify the mechanical aspects of the servo feed

CAUTION - Contact the factory before drilling any holes in the unit

CAUTION - Wear proper eye protection when working around the servo

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (35 of 66) [12/10/2001 3:44:58 PM]

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 57 58

Sem comentários

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manual do Utilizador Página 36