Rapid-air AIR FEED / RAPID MASTER WITH KEYPAD Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Rapid-air AIR FEED / RAPID MASTER WITH KEYPAD. Rapid-Air AIR FEED / RAPID MASTER WITH KEYPAD User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 23
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
1
RAPID-AIR CORPORATION
4601 KISHWAUKEE ST. • ROCKFORD, IL 61109-2925
Phone: (815) 397-2578
• Fax: (815) 398-3887 • Web Site: www.rapidair.com
air feed / rapid master
with keypad
operating instructions
Vista de página 0
1 2 3 4 5 6 ... 22 23

Resumo do Conteúdo

Página 1 - Phone: (815) 397-2578

1RAPID-AIR CORPORATION4601 KISHWAUKEE ST. • ROCKFORD, IL 61109-2925Phone: (815) 397-2578 • Fax: (815) 398-3887 • Web Site: www.rapidair.comair feed

Página 2

10The attempt is made to start the machine by pulling the mushroom start button but no lights illuminate.The attempt is made to cycle the feed but th

Página 3 - Rapid Master Installation

11Problem Possible Causes Remedycharacteristics and possible causes of troubles with rapid-

Página 4 - Maintenance

12Problem Possible Causes Remedycharacteristics and possible causes of troubles with rapid-

Página 5 - Proper Lubrication

13Problem Possible Causes Remedycharacteristics and possible causes of troubles with rapid-

Página 6 - Electrical Set-Up

14Programming Procedure

Página 8

16Air Feed Speed Adjustment

Página 9

17Programming Procedure

Página 10

18Electrical Assembly

Página 11

19Operator Keypad

Página 12 - (continued)

2INSTALLATION AND MECHANICAL SET-UP OF DIE OR PUNCH ... pg. 3AIR FEED PROGRESSION SET-UP AND MAI

Página 13

20Control Panel Wiring Diagram

Página 14 - Programming Procedure

21Rapid Master Unit with Air Feed

Página 15

22Rapid Master Mechanical Setup

Página 16 - Air Feed Speed Adjustment

23ALL SALES BY THE COMPANY ARE MADE SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. PLEASE READ.WARRANTY – The Company warrants, for a period of one

Página 17

3The Rapid Master that you have just re-ceived is fully assembled and ready to be put into production. Due to shipment vibration and handling, the ma

Página 18 - Electrical Assembly

4The feed guide rollers are adjustable by loosening the machine screws and moving the rollers to the desired posi-tion. For best result, the stock sh

Página 19 - Operator Keypad

5For a general guide for the Rapid Master, the lubricator oil release adjustment should be set to one drop of oil for each 50-80 strokes. (See insert

Página 20 - Control Panel Wiring Diagram

61. Master power on/off buttonLighted 2 position switch, located on the side of the console. When turned on the switch should illuminate.2. Tonnage

Página 21

7A. Taut stock inputThis is a normally open contact from a switch or device that monitors the loop of material prior to the air feed. When the mater

Página 22 - Rapid Master Mechanical Setup

8The intent of this section is to familiarize the operator with the program flow and what to expect with every keypress. Each screen on the display wi

Página 23

9The unit is now in full automatic. Whenever an input for feed is received, the air feed will feed the cycles programmed and increment the counter by

Comentários a estes Manuais

Sem comentários